Yup, those caps would work well. I might get some to try out. But it really isn't a problem in my set up. I thought about capping the ends but since I have not had any (not even close calls) in about 4 years (since I built it) I plan to leave it. I also don't want to end up catching the clamps on the cap rim as I bring them out. My spacing between levels is quite close. There is not much "lifting" room.

But the caps certainly are a good item for the right situation

I will try to take some pics showing leg room later.

Oh, I think the rod is 3/8" so rebar caps should fit well.

Seth

__________________
If you know where it's comin' from ...... You can tell where it's goin'. ========> ======> =====> ====> ===> ==> => > > >>>

Nice rack Seth, now all you need is some silicone!

I'll explain,,,

Firstly, have you considered slipping some vinyl tubing over the threaded rods where the clamps rest? ( you could find the exact size for a secure fit) I would imagine that would help cushion the clamps as you place them on the rods. Also, concerning Peter's concern, you could overextend the sleeves by about a fat 1/8th inch and put a dab of silicone on your finger then fill in the difference. Presto, end protector without the lip!


,,,,,,,r

.