Ron,

Yes and when it does John is going to have the brightest shop in existence. In fact at night astronomers will think they have found a new star.

Fred

__________________
Kapex, OF2200,Domino,TS 75, Trion PS 300, RO 150, RO 90, ETS 150/5, ETS 150/3, DTS 400, RS 400, LS 130, RS 2, Deltex 93, RAS 115, CT 33, CT 22, CT 26 CT Midi, OF 1400, MFK 700, C 12, LR 32 3, Shinex, MFT/3s, 3 MFT 1080s, WCR 1000, UG-KA-SET, 10 Sysports, 2 Walko's, Marcou's J20A, S20A, M12, S45, S55A, VSP 40, Brese 650-55J, Sauer & Steiner XSNo.4, SS Jointer, A5 Desert Ironwood and #4 Damascus, Knew Concepts 8 inch Fretsaw, Knew Concepts 5 inch Titanium Fretsaw, Hammer K3 48x48, Hammer A3 31

The Butt Mortise plane on ebay is up to $86.00 with 4 days left -- LIE-NIELSEN BUTT MORTISE PLANE VINTAGE HAND TOOL - eBay (item 380259988509 end time Aug-23-10 17:02:59 PDT)

What's this? John's tables have electric motors that make them turn? Well, at least when he gets powered up. I'm getting dizzy just thinking about it!

Right, Butt Hinge, mortise plane for making the cut to fit that hinge on your door.
Anyway, I have one too, and while I've never thrown 70 doors at it[] it's worked great for the few times I've used it since I don't own a jam/router set for cutting out door hinges or lock set holes. Brice, it's actually one of their cheaper hand planes, so you're not even in the pricey league yet with L-N.......

__________________
Some t-shirts, a hat, some free pencils, lots of tools, 1 TOOLIE, (thanks RWeber!)but mostly, a satisfied customer

Dear Leakyroof: I'll have you know that I did not write "butt mortise chisel" which was what Fred had also not written in his post. He then used his administrator status to go back and change things just to make me look good but it did not work. I wish I knew what a butt mortise plane is. I had just never heard of a one and thought that it apparently did not exist - either in reality or in my other reality. Sigh. I am such a ba$tard!

__________________
I don't have as many Festools as Fred. Or Marcou's, or Brese's, or Lie-Nielsen's, or Lee Valley's, or Blue Spruce's, or Harold and Saxon's, or...

Pilkow,

I think that you are being a little harsh on yourself. Never fear there are many of us here on the board that know your issues and will still speak to you.

Fred

__________________
Kapex, OF2200,Domino,TS 75, Trion PS 300, RO 150, RO 90, ETS 150/5, ETS 150/3, DTS 400, RS 400, LS 130, RS 2, Deltex 93, RAS 115, CT 33, CT 22, CT 26 CT Midi, OF 1400, MFK 700, C 12, LR 32 3, Shinex, MFT/3s, 3 MFT 1080s, WCR 1000, UG-KA-SET, 10 Sysports, 2 Walko's, Marcou's J20A, S20A, M12, S45, S55A, VSP 40, Brese 650-55J, Sauer & Steiner XSNo.4, SS Jointer, A5 Desert Ironwood and #4 Damascus, Knew Concepts 8 inch Fretsaw, Knew Concepts 5 inch Titanium Fretsaw, Hammer K3 48x48, Hammer A3 31

Don't be so hard on yourself, Fred. You're our favorite ...




Hey, somebody has to stick up for Peter.

Fred: you suck! Seriously! Stop editing my posts!

__________________
I don't have as many Festools as Fred. Or Marcou's, or Brese's, or Lie-Nielsen's, or Lee Valley's, or Blue Spruce's, or Harold and Saxon's, or...

I just can'T believe that Fred would or has ever done anything like that...

Is he posting as you now, Ron?

__________________
I don't have as many Festools as Fred. Or Marcou's, or Brese's, or Lie-Nielsen's, or Lee Valley's, or Blue Spruce's, or Harold and Saxon's, or...