View Single Post
  #1 (permalink)  
Old 02-03-2016, 10:07 PM
markhays markhays is offline
Join Date: Nov 2010
Location: Utah
Posts: 23
Default Kapex main fences

I'm using my Kapex for the first time. I needed to adjust it slightly for a 90 degree cut. I verified it with an accurate square. (I have not yet used the method shown on p. 24 in the online manual.) Here's the problem: In sliding a piece of baseboard to my right along the left fence - my left - it just barely stops against the inner edge of the right fence. Is there a way to correct this slightly out of alignment situation with the fences? Appreciate the help.
Mark Hays
Reply With Quote