View Single Post
  #1 (permalink)  
Old 12-09-2011, 06:00 PM
btracey1 btracey1 is offline
Join Date: Oct 2009
Posts: 45
Default Split Top Saw Bench

Hey Guys and Gals,
Not sure if this should go in this topic or in hand tools....but anyway, I originally made this Saw Bench for making rip cuts on narrow stock (don't have a table saw or a band saw) and it's been really stable and works great. I have added a few holdfast holes on both top surfaces. It's just made from Construction grade 2X4s and 2X6s. I had seen a few Saw Bench designs that had used an open center, but they all had cross members that needed to be worked around, and I thought....why not give this idea a try! So far, so good.
Attached Thumbnails
split-top-saw-bench-img_7382.jpg   split-top-saw-bench-img_7380.jpg   split-top-saw-bench-img_7386.jpg   split-top-saw-bench-img_7387.jpg  

Last edited by btracey1; 12-09-2011 at 06:03 PM.
Reply With Quote