Thread: Sundry Items
View Single Post
  #1 (permalink)  
Old 09-14-2011, 12:27 PM
Philip Marcou's Avatar
Philip Marcou Philip Marcou is offline
Join Date: Aug 2009
Location: New Zealand
Posts: 524
Send a message via Skype™ to Philip Marcou
Default Sundry Items

I hit on this idea so I can post the odd unrelated snippet etc with impunity. Or just say nothing here.
So there was a need to make a set of angle wedges at 50 for use in the machine vise when milling ramps at this angle. They need to be accurate and identical so I rivet two slabs of 10mm mild steel together after surface grinding one face on each, then machine them as one unit and separate them when all is done.
I use a bevel box and an angle gauge to mark and check the angle.
Pictures follow.
Attached Thumbnails
sundry-items-p9140001.jpg   sundry-items-p9140003.jpg   sundry-items-p9140004.jpg   sundry-items-p9140005.jpg   sundry-items-p9140006.jpg  

sundry-items-p9140007.jpg   sundry-items-p9140008.jpg  
Philip Marcou
Reply With Quote