View Single Post
  #5 (permalink)  
Old 10-29-2009, 02:08 AM
RONWEN RONWEN is offline
Join Date: Jan 2009
Location: 41N 79W One of the Thirteen Original Colonies of the United States of America
Posts: 4,820
Default Re: KM-1 and Stanley # 93

Originally Posted by MichaelKellough View Post
I can't even keep it clear in my mind how the KM-1 works so......

However, you can download a pdf of the original instructions for the 93 and check it out.
Just think about it as a "flip stop" -- the first setting defines the width of the (saw) kerf and the second setting defines the width of the groove, dado, cross-lap, rabbet, etc. Cutting pass #1 cuts one side of the groove, flip the stop & move the fence or piece that distance and cut the other side, then make passes to remove the waste in the center of the first two passes.

That is a GREAT link Michael. You add so much good information to this forum! (No, I haven't been drinking ).

Last edited by RONWEN; 10-29-2009 at 02:54 AM.
Reply With Quote